Features:

• Enhanced highest clamping force, more suitable for heavy cutting.
• Tilting angle rotated by hand, rotary table controls by NC controller.
• Can do any angle machining.

Specifications:

• Clamp Method: Pneumatic 5kg/cm²
• Faceplate Dimension: Ø170mm
• Spindle Through Hole Diameter: Ø45mm
• Faceplate Central Hole Diameter: Ø50H7mm
• Central Height: 170mm
• Faceplate T-Slot Width: 12H7mm
• Position Key: 18h7mm
• Servo Motor:
  Rotary Axis: FANUC: α4i / β8i
  MELDAS: HA40 / HF053T
• Tilting Axis: FANUC: α6 / α8i Manual
• Speed reduction ratio: Rotary Axis: 1/72
• Tilting Axis: 1/90
• Min. Increment Unit (Rotary): 0.001°
  (Tilting Axis): 5'
• Indexing Accuracy: 30 (Arc. Sec.)
• Repeatability: 4 (Arc. Sec.)
• Clamp Force: 16kgf/m
• Max. Torque Capacity of Worm Gear: 27kgf/m
• Tilting Axis: 0° ~ 90°
• Max. Workpiece of Capacity:
  Vertical (With Tailstock): 75 (150)KGS
  Horizontal: 150KGS
• Net Weight (Without motor): 90KGS

Accessory

Digital Angle Display (Optional Attachment)	TRO-2005	BT-40100 BT40 Tool Clamp Device
Tilting Axis can be attached with Digital Angle Display. Resolution: 0.02°		Able to attach BT40 collet Chuck with fixyure and perform auick too-change. Grip / Change work piece fast and easy. Excellently suit for tool machining.

The Outline of Dimension:
Unit: mm